The Z Cam controller version 1.0.762 beta and PTGui template available here: https://www.dropbox.com/s/20rs6wpktndbsmr/20200619_1.0.762.zip?dl=0 https://www.dropbox.com/s/lq7gl32ael87eli/K2pro-2772-VR180.pts?dl=0
Category Archives: K2 Pro
Here are some behind-the-scene info about the Ecosphere project, check the K2 Pro in action 🙂
This wonderful project was made by the Oculus team using K2 Pro and the equivalent E2 pair under water rig with our iZugar MKX200 fisheye lenses. You may check with your Oculus Quest or Oculus Go headset. https://www.phoria.com.au/projects/ecosphere/
Many users ask for how to rig up for the K2 Pro. Here is the setup of today: 1. K2 Pro (Pre-production edition)2. Sync cable by Alvin’s Cable (included with K2 Pro now)3. Sony NP-F970 batteries x2 (V-mount battery recommended if you want to shoot for a long time)4. Sandisk extreme SSD 3.1 x2 (cfast […]
The depth of field of the lens was designed to be very deep at all aperture stops, so there is no need to tune the focus when shooting in the field. However, please make sure the focus is at peak in advance. The focus ring was retained by three tiny screws on the focal ring. […]
Thanks for choosing K2 Pro. When you receive your new camera please note the followings and set to the suggested shooting parameters for VR180. Feel free to contact our support if you have any questions, thanks. Do not dismount the lenses. The fisheye lenses have been fully calibrated and fit with a template for MsitikaVR. […]
Introduction Thanks for choosing K2 Pro, the premium VR180 camera that deliver cinematic quality like never before. It is the state-of-the-art hardware combinations for the best VR180 experience: The large pitch size sensors ensure good sensitivity and better noise control; Wide dynamic range upto 16 stops and 10-bit color enable smoother color gradient; It can […]
Newly added features relevant for the K2 Pro: Low Jello ModeDe-noise options (off/weak/medium)USB-Serial converter is supportedHEIF/DNG is supported for still capturePTP is supportedSync shooting parameters to slave camera # Improvements: Partial debayer ZRAW, compression ratio 8:1, 4K@60fps maxRefined saturation in shadow # With the new firmware 0.94 the master camera can now sync the ISO, […]
Here is a sample footage made with K2 Pro in 59.94fps, stitched in MistikaVR and edited the slow motion in Premiere Pro. Besides checking the slow-mo you may also check how well the stereo can go with just one feet away (at the end of the video). You may also download it and side-load into […]